2×3 Aluminum Elbows & Longneck Ledge Jumpers | A & B Style | 75 & 30 Degree | 30 Per Box

Gutter elbow and longneck ledge jumper designed for professional downspout installations requiring directional changes and offset clearance.

Available in two styles and two bend angles to handle any installation layout:

Standard Elbows — 75 Degree Bend:

• A Style — elbow comes straight out toward you
• B Style — elbow turns to the right or left

Longneck Ledge Jumpers — 30 Degree Bend: Also known as brick offsets or ledge jumpers, the longneck elbow is used when the downspout needs to clear a ledge, brick, or other obstruction before continuing down the wall. The 30 degree bend provides the clearance needed to navigate around architectural features without cutting or fabricating custom pieces on the job site.

Constructed from .019 aluminum and available in multiple colors to match your full downspout and coil color lineup for a clean, professional finished appearance.

Pro Tip: Did you know you can use 3×4 accessories with 5″ gutters? Consider upgrading your customer to a larger downspout size for better water flow and drainage capacity — a simple upsell that adds real value to any installation.

Specifications:

• Size: 2×3 inches
• Material: .019 aluminum
• Standard Elbow Angle: 75 degrees
• Longneck Angle: 30 degrees
• Styles: A and B
• Also Known As: Ledge jumpers, brick offsets
• Colors: Multiple — matches downspout and coil lineup
• Box Quantity: 30 pieces